Special requirement code: Body, bonner bolt - jointed structure (default) Hs-body, bonnet welded structure Ps-pressure sealed structure D-low temperature valve B-bellows valve E-body extended-end valve
Code of aperture: DN
Valve type code: Z—Gate Valve J—Globe valve H—Check valve
Driving manner code: 3—Worm gear worm 4—Spur gear 5—Bevel gear 6—Air driving 9—Electric driving(Hand wheel driving omitted)
Connecting type code: 6—Welding 8—Bear and insert welding
Design feature code: 0—Flexible wedge 2—DoubIe gate
Sealing formation code: H—13Cr Y—Stellite
Pressure grade code: 1500Lb 2000Lb 2500Lb 3000Lb 3500Lb
Body material code: C—WCB C1-WC1 I-WC6 V-WC9 C12-C12A
Note:8'-1500Lb welded-end electric gate valve(manually actuation's code is omitted),the sealing face material of elastic wedge disc Stellite, body material Wc9.
Actuation modes:manual,electric,spur and bevel gear,pneumatic actuations,please make it clear at order.
Weld-connected gate valve and stop valve are suitable for the pipeline of PN1.6~32.0MPa,P54/100V~P57/170V,a working temperature <= 540°C (570°C for P57/170V) in various systems of petroleum. chemical industry, steam power, hydraulic etc.to cut off and get through the medium. The suitable media are: water, steam, oil goods, acid media and so on.
Conforms with the requirements of the domestic and foreign advanced standards.The middle cavity of the valve uses the pressure self-tightening sealing structure,the two ends of the branch pipe use welded structure and the welded groove can be connected per eight the standard or the required one by users.Of a reliable seal,good performance and nice modeling.
The sealing faces of both disc and seat ring are made by means of means of built-up welding with either iron-based alloy or Stellite Co-based carbide alloy upon different requirements,wearable,high temperature resisting,corrosin resisting,good friction resisting and long duration.
The stem,after the modified and surface nitriding treatment,has a good friction and corrosin resistance and a back-seal structure to ensure the valve no leak outward from the stem when opened during running and able to replace the stem packing.
The valves with a large or a middle apertures can use the internal by-pass structure and be set with a rolling bearing and a thrust bearing, resulting in flexible open-close.
The electric stop valve is fitted with SMC valve electric actuator,features a small casing,light weight,full functions and a nice outlook and can be used either with a program controlled computer or an electric actuator upon the user requirement.
"Due to the performance of the website, we just only display several information about Check Valve. Please download the Check Valve Catalog for full list of product specifications."PT Greentech Global Engineering